中文  /  EN  /  JP

Industry NewsYour Location:Home > News > Industry News

What are the clamping methods of auto inspection tool accessories?

Publisher: Administrator    Date:2021-07-07

We often present errors due to various reasons in industrial production. In order to deal with this problem, automobile inspection tool parts manufacturers have developed inspection tools. In short, there are special-scale error inspections that can be adjusted and can be reused. Everything can be called a checker. It is a simple tool used by industrial production companies to control various scales of goods to improve production power and control quality. Similarly, error checking is also required in the production of cars. At this time, car inspection tools are required. Then, what are the clamping methods for car inspection tools?

Horseshoe-shaped indenter clamping method: The raw material of the chuck is aluminum, and the opening should be greater than 6.5mm. This method is generally used for the inspection tools of the masses. The three-coordinate measuring machine can measure the base point of the RPS positioning surface. In order to achieve this intention, the clamp arm should not exceed the base point of the RPS positioning surface, otherwise the three-coordinate probe will be blocked by the clamp arm and affect the measurement. In addition, if there are positioning or inspection pins on the positioning surface, pay attention to the chuck not to interfere with the positioning or inspection pins when the clamp is opened, which will affect the operability.

Positioning surface and clamping: In principle, a clamping is required for each positioning surface. The clamping point should be located at the base of the positioning surface, and the clamping direction of the clamp should be the same as the normal direction of the positioning surface. The viewpoint of the positioning surface and the support surface of the clamp can be ignored if it is less than 5 degrees. If it is greater than 5 degrees, the clamping direction of the clamp should be the same as the normal direction of the positioning surface.

Flat push clamping: including clamps and tension spring clamping methods, in general, you should try to think about the clamping method with clamps.

The clamping methods for car inspection tools are shared here today. The car inspection tools can be visually inspected through different holes on the parts and the connection position between the parts and the parts, and then ensure that the quality of the parts is completed at the time of production. The rapid identification. In this situation, it can be judged by visual inspection or measurement, and the deviation between the part summarizing the peripheral size and shape area and the relative orientation and the theoretical value of the inspection tool directly processed by CAD/CAM.
Home About Us Products Machining Quality System News Feedback Contact Us
Tel:+86-0769-85385589 85381189
Phone:+8613480439007
Fax:+86-0769-85385989
E-mail:jenny@goodingjp.com
Skype:number:jennyliu6666
Web:www.goodingjp.com
Alibaba:http://www.goodingjp.en.alibaba.com
Add: No.9, Jinghai East Road, Shatou,Chang’an Town, Dongguan, Guangdong

Follow Us
CopyRight © 2021 Dongguan Gooding Checking Fixture & Equipment Pabushinrt Co., Ltd.  

Online
Service

ConsultationTime:9:00-18:00

Select customer service:

Hot
Line

400-8755521
7*24H Service

Follow
Us

Website
TOP