We often present errors due to various reasons in industrial production. In order to deal with this problem, automobile inspection tool parts manufacturers have developed inspection tools. In short, there are special-scale error inspections that can be adjusted and can be reused. Everything can be called a checker. It is a simple tool used by industrial production companies to control various scales of goods to improve production power and control quality. Similarly, error checking is also required in the production of cars. At this time, car inspection tools are required. Then, what are the clamping methods for car inspection tools?

Horseshoe-shaped indenter clamping method: The raw material of the chuck is aluminum, and the opening should be greater than 6.5mm. This method is generally used for the inspection tools of the masses. The three-coordinate measuring machine can measure the base point of the RPS positioning surface. In order to achieve this intention, the clamp arm should not exceed the base point of the RPS positioning surface, otherwise the three-coordinate probe will be blocked by the clamp arm and affect the measurement. In addition, if there are positioning or inspection pins on the positioning surface, pay attention to the chuck not to interfere with the positioning or inspection pins when the clamp is opened, which will affect the operability.

Positioning surface and clamping: In principle, a clamping is required for each positioning surface. The clamping point should be located at the base of the positioning surface, and the clamping direction of the clamp should be the same as the normal direction of the positioning surface. The viewpoint of the positioning surface and the support surface of the clamp can be ignored if it is less than 5 degrees. If it is greater than 5 degrees, the clamping direction of the clamp should be the same as the normal direction of the positioning surface.

Flat push clamping: including clamps and tension spring clamping methods, in general, you should try to think about the clamping method with clamps.

The clamping methods for car inspection tools are shared here today. The car inspection tools can be visually inspected through different holes on the parts and the connection position between the parts and the parts, and then ensure that the quality of the parts is completed at the time of production. The rapid identification. In this situation, it can be judged by visual inspection or measurement, and the deviation between the part summarizing the peripheral size and shape area and the relative orientation and the theoretical value of the inspection tool directly processed by CAD/CAM.