中文  /  EN  /  JP

Industry NewsYour Location:Home > News > Industry News

How to maintain the car inspection tool?

Publisher: Administrator    Date:2021-07-07

How to maintain car inspection tools? At present, with the gradual improvement of the design and accuracy of automobile inspection tools, many automobile inspection tools must be fully maintained to extend their service life. The following editor will briefly introduce the methods and steps of car inspection and maintenance.
1. Basic maintenance of automobile inspection tools: ensure that the exterior of the inspection tool simulation block is clean, and the positions of some bottom plates, bolts and detection pins must be clean; put the movable parts that need to be disassembled in the corresponding positions.
2. Keep the environmental factors of the car inspection tool dry: the storage temperature of the car inspection tool should be guaranteed between minus 10 degrees Celsius to 60 degrees Celsius; the humidity should be below 60 degrees; the particles should not exceed 2%.
3. The maintenance time can be divided into half a year or once a year for treatment:
(1) Check whether the pin hole is worn or not, if there is any problem, replace it immediately;
(2) Check whether the precision slideway is loose, and add lubricating oil in time;
(3) Timely check the marking scale and coating for peeling and wear;
(4) Check whether the positioning datum is rusty and worn, if it is, replace it or polish it immediately;
Carrying out maintenance according to the above-mentioned methods can ensure that your car inspection tools will never have big problems. Good maintenance can promote the improvement of work efficiency. We once again remind users and friends that car inspection tools are not like The high-precision performance of other inspection tools and automotive inspection tools cannot show any loss. So take care of your inspection fixture products.
Home About Us Products Machining Quality System News Feedback Contact Us
Tel:+86-0769-85385589 85381189
Phone:+8613480439007
Fax:+86-0769-85385989
E-mail:jenny@goodingjp.com
Skype:number:jennyliu6666
Web:www.goodingjp.com
Alibaba:http://www.goodingjp.en.alibaba.com
Add: No.9, Jinghai East Road, Shatou,Chang’an Town, Dongguan, Guangdong

Follow Us
CopyRight © 2024 Dongguan Gooding Checking Fixture & Equipment Parts Co., Ltd.

Online
Service

ConsultationTime:9:00-18:00

Select customer service:

Hot
Line

400-8755521
7*24H Service

Follow
Us

Website
TOP