How to maintain the car inspection tool? At that time, with the gradual progress in the design and accuracy of automobile inspection tools, many automobile inspection tools had to undergo adequate maintenance to extend their service life. The following editor of standard parts manufacturers of automobile inspection tools will briefly introduce the methods and processes of automobile inspection tools maintenance.

1. Fundamental protection of automobile inspection tools: ensure that the exterior of the inspection tool imitation block is clean, and the positions of some bottom plates, bolts and detection pins must be clean; put the movable parts that need to be disassembled in the corresponding positions.

2. Adhere to the dryness of the environmental elements of the car inspection tool: the storage temperature of the car inspection tool must be guaranteed to be between minus 10 degrees Celsius and 60 degrees Celsius; the humidity must be below 60 degrees; the particles must not exceed 2%.

3. The maintenance time can be divided into half a year or once a year for treatment:
(1) Check whether the pin hole is worn or not, and replace it immediately if there is a problem;
(2) Check whether the fine slideway is loose, and add lubricating oil in time;
(3) Check whether the marking scale and coating have fallen and worn in time;
(4) Check whether the positioning datum is rusty and worn, if yes, replace it or polish it immediately;

Carry out maintenance according to the several methods mentioned in the editor of the standard parts manufacturer of automobile inspection tools, which can ensure that your automobile inspection tools will definitely not show big problems. Outstanding maintenance can promote the improvement of working power. Friends, unlike other inspection tools, the high-precision function of automobile inspection tools cannot show any loss. So take care of your inspection tool products.