Waist round pin sleeve
Product name: Special-shaped hole pin sleeve
Material: SKD11 etc.
Surface treatment: nickel plating, chrome plating, etc.
Remarks: can be customized
Features:
1. Full rust prevention
2. Good wear resistance
3. High accuracy
4. Exquisite appearance, etc.
|
[ M ] Material |
[ H ] Hardness |
①Straight | ②Shouldered | |||
| Type | Material Code | Type | Material Code | |||
| Dowel Pin | SKS93 Tool Steel (JIS) Equivalent | 50~60HRC |
(P+0.03 +0.01/W+0.03 +0.01) KJB (PH7/WH7) KJBH |
SC |
(P+0.03 +0.01/W+0.03 +0.01) KJB (PH7/WH7) KJBH |
STC |
| 304 Stainless Steel | - | SCS | STCS | |||
| 440C Stainless Steel | 45~50HRC | SCC | STCC | |||
| D Cut | SKS93 Tool Steel (JIS) Equivalent | 50~60HRC |
(P+0.03 +0.01/W+0.03 +0.01) KJB (PH7/WH7) KJBH |
SCD |
(P+0.03 +0.01/W+0.03 +0.01) KJB (PH7/WH7) KJBH |
STCD |
| 304 Stainless Steel | - | SCDS | - | |||
| 440C Stainless Steel | 45~50HRC | - | STCDC | |||
| Part Number | - | P | - | W | - | L | - | T | ||||
| Type | Material Code | D | ||||||||||
| KJB | STC | 12 | - | P9.50 | - | W4.50 | - | L15 | - | T2 | ||
| P, W | H7 |
| 3.00~ 6.00 |
+0.012 0 |
| 6.01~10.00 |
+0.015 0 |
| 10.01~18.00 |
+0.018 0 |
| 18.01~27.00 |
+0.021 0 |
| Part Number | All Types | ②Shouldered Type only | |||||||||||
| Type | Material Code | D | 0.01mm Increment | L | R | T | H | ||||||
| Straight, Dowel[ ! ]2 | Straight, D-Cut | Shouldered, Dowel[ ! ]2 | Shouldered, D-Cut | P | W | 1mm Increment | |||||||
|
(P+0.03 +0.01/W+0.03 +0.01) KJB (PH7/WH7) KJBH |
SC SCS SCC |
SCD SCDS |
STC STCS STCC |
STCD STCDC |
8[ ! ]3 | 4.00~ 6.00 |
P>W (W≥3.00) |
(Straight) 5~20 (Shouldered) 10~20 |
2.0 | 2 | 3 | 5 | D+4 |
| 10 | 4.00~ 8.00 | ||||||||||||
| 12 | 4.00~10.00 | ||||||||||||
| 16 | 6.00~14.00 | ||||||||||||
| 20 | 10.00~18.00 | ||||||||||||
| 25 | 14.00~22.00 | ||||||||||||
| 30[ ! ]4 | 20.00~27.00 | - | - | ||||||||||
Your Location:
Q Q
Website